Double the efficiency: the dual-platform design doubles efficiency, greatly reduces costs and makes your products more competitive.
Excellent versatility: Hot stamping, embossing and holographic patterns can be applied to a wide range of materials, including diffraction hot stamping with complex structured images.
Multi-process combination: the machine's functions can be combined according to the process requirements of the product, so that a single machine covers several processes and produces satisfactory products.
Efficient and cost-saving: The rapid changeover from hot stamping to die-cutting causes hardly any downtime due to foil breakage. A dedicated system is included for efficient production data management.
User-friendly operating interface: the hot stamping section uses a 19-inch high-definition touch screen, and all settings and functions are easily accessed by touch. Drawing on in-depth knowledge of the machine, a proprietary operating and control system has been developed that is simple, intuitive and easy to use.
Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.
Interested in this machine? Write to us and we will prepare an offer.
Send an inquiry
In-house developed 4-suction, 4-feeder head feeds various stocks reliably; the pre-stacking device supports a pile height of 1600 mm without stopping the machine.

The paper feeding belt, with 6 imported front drive shafts and a German cross steel plate, guarantees flat paper conveyance.

Main and auxiliary feeding platforms support non-stop switching to save paper loading time and boost overall productivity.

5 main frames redesigned by German and Japanese engineers, Mitsubishi 5-face machining, ±0.01 mm tolerance, maximum die-cutting pressure of 550–600 t.

The main frame is made of premium materials. A high-efficiency, self-locking worm drive with a large reduction ratio and central metered lubrication reduce wear.

The integral cast base resists deformation, and the tongue-and-groove keyway connection ensures vertical balance during adjustment.

SMC pneumatic cylinders lock the upper and lower die frames firmly to prevent losses caused by manual operating errors.

Hard-anodized aerospace aluminum gripper bars with a flatness of ±0.05 mm, CMM inspected; Japanese gripper tips last 3 years.

The machine uses well-known brand electrical components to ensure stable long-term operation.

A high-torque drive shaft with dynamically balanced couplings ensures smooth, vibration-free operation and synchronous running of both units.

A precision air valve adjusts airflow to feed thin special paper stably, avoiding paper wrinkles, offset and feeding malfunctions.

Dual positioning screws allow quick, precise and easy adjustment of the gripper bars of both stations.

Heavy-duty thickened side plates and worm gears made of QT500-7 ductile iron with high tensile strength ensure stable operation.

A torque limiter protects the gripper bars from secondary collision for safe, stable and efficient production.

Taiwanese intermittent mechanism with belt drive, running more smoothly than traditional chain transmission.

Automatic lubrication of cams and chains with uniform, precise oil supply and no manual work, increasing machine efficiency.

Equipped with a Miki clutch to control the feeding belt, allowing one unit to run while the other stands by.

The highly rigid integral cast base absorbs die-cutting impact, and the adjustable clearance allows precise die-cutting.

A built-in high-safety light curtain monitors the danger zone, and the machine stops instantly to prevent accidents.

Energy-saving 20-zone heater with French sensors and Omron PID control (±1 °C), preheating function and automatic foil consumption calculation.

Simultaneous stamping of 6 vertical and 6 holographic lanes supports multiple processes in a single pass and raises equipment utilization.
| Paper size | Min. 450×370 mm Max. 1060×760 mm |
| Max. die-cutting area | 1045×745 mm |
| Maximum hot stamping area | 1040×740 mm |
| Gripper margin | 9-17 mm |
| Max. die-cutting pressure | 550 t (unit 1) 320 t (unit 2) |
| Paper specifications | Paperboard: 0.1–3 mm Corrugated board: ≤4 mm White paperboard: 90–2000 g/m² |
| Maximum die-cutting speed | 6500 sheets/h |
| Max. hot stamping speed | 5500 sheets/h |
| Max. holographic stamping speed | 5000 sheets/h |
| Die-cutting accuracy | ≤±0.075 mm |
| Standard hot stamping precision | ≤0.075 mm |
| Holographic registration stamping precision | ≤0.20 mm |
| Heating zones (unit 1) | 20 heating zones, heating temperature 20–200 °C |
| Feeder pile height | 1600 mm |
| Delivery pile height | 1350 mm |
| Main motor power | 22 kW |
| Max. total power | 90 kW |
| Total weight | 42 t |
| Overall dimensions | 8500×5400×2600 mm |
| Max. foil roll diameter | Φ250 mm |
| Compressed air requirements | 6–8 bar; 600 L/min |
No video is available yet. We will gladly show and explain everything – write to us.
Send an inquiry